Community
cancel
Showing results for 
Search instead for 
Did you mean: 
TBail1
Beginner
1,213 Views

Trying to connect VGA out on computer to VGA in on Toshiba DLP TV. No signal detected by TV. Can onyone assist.

Jump to solution

Toshiba DLP TV shows NoVideo Signal Detected when I attempt to connect VGA out on computer to VGA in on TV. Can anyone assist?

0 Kudos

Accepted Solutions
EstebanA_C_Intel
Employee
44 Views

Hello, tpb001739:

You could test the following:

1. Use a different VGA cable to connect the system.

2. If not currently using, use a straight connection between both devices (VGA to VGA).

3. Also, you could test using a different video output is possible to discard that as the issue.

4. Make sure the correct source is selected in your TV, it could be PC or VGA.

Regards,

Esteban C

View solution in original post

1 Reply
EstebanA_C_Intel
Employee
45 Views

Hello, tpb001739:

You could test the following:

1. Use a different VGA cable to connect the system.

2. If not currently using, use a straight connection between both devices (VGA to VGA).

3. Also, you could test using a different video output is possible to discard that as the issue.

4. Make sure the correct source is selected in your TV, it could be PC or VGA.

Regards,

Esteban C

View solution in original post