- Отметить как новое
- Закладка
- Подписаться
- Отключить
- Подписка на RSS-канал
- Выделить
- Печать
- Сообщить о недопустимом содержимом
I need to use two external monitors with this laptop. Intel says card will do it. Right now I'm using the laptop screen and an external through HDMI. I've tried another monitor through USB and USBc without success. How do I make two external monitors work?
Ссылка скопирована
- Отметить как новое
- Закладка
- Подписаться
- Отключить
- Подписка на RSS-канал
- Выделить
- Печать
- Сообщить о недопустимом содержимом
According to the spec sheet on the HP site, the USB-C port on your laptop is data transfer only - which means that there is no support for DisplayPort Alt Mode. Bottom line, there is support in this laptop for connecting only a single external monitor.
All is not lost. You can use a USB 3.1 Gen 1 port (either USB-C or USB-A) to connect a USB graphics adapter. Here are some examples of such adapters:
- 1080p@60Hz: https://www.amazon.com/dp/B08Z334924 (cheap, not sure I would trust it)
- 2160p@30Hz: https://www.amazon.com/dp/B01FXDW2ZY
- Dual 2160p@60Hz: https://www.amazon.com/dp/B072FHTZ8V
(Note: these are examples only; I have not tried them and thus am not endorsing them).
Hope this helps,
...S

- Подписка на RSS-канал
- Отметить тему как новую
- Отметить тему как прочитанную
- Выполнить отслеживание данной Тема для текущего пользователя
- Закладка
- Подписаться
- Страница в формате печати