Component location in a .vho netlist written with EDA tools

Intel® Quartus® Prime Software

Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)

Component location in a .vho netlist written with EDA tools

1,106 檢視

Hello,

I generated a .vho netlist with EDA tools and I try to find information about signal locations. For example in this netlist I found in comment :

-- Location: MLABCELL_X104_Y57_N48

So in parallel with Chip Planner, I am ok that my signal has coordinate (104 , 57) but I don't know what does N48 mean. Any idea ? Does it refer to an element in the MLABCELL ?

And in this netlist, the coordinate system is a global one or is there other coordinate systems for specific logic blocks in Altera place-and-route methods ?

Thanks

連結已複製

0 回應

週一至週五提供社區支援。請點選這裡查看其他聯絡方式。

Intel 不會確認所有解決方案，包括但不限於可能出現在這個社群的任何檔案傳輸。因此，Intel 不承諾任何明示與暗示保證，包括但不限於適售性的暗示保證、適用於特定用途和無侵權，以及肇因於履行過程、交易過程或商業慣例的任何保證。

如需有關編譯器最佳化更完整的資訊，請參閱最佳化公告.