Hello My name Ercherio... I am a Electrical Engineering from ITDEL (Indonesia). I want to do project about Face Detection and Counting using FPGA. I need your suggest,"what is methode and material or type of FPGA and Camera to prepare to do this project?"
链接已复制
Hello,
Thanks for contacting us.
Basically there is a wide range of FPGA development kits to do such a project.
My preferred dev kit is DE10 Nano SoC. This is a Cyclone V soc device with Arm SoC.
https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&No=1046
For the camera, this module you need to search about since we dont have camera modules. However, you might start with this:
https://www.youtube.com/watch?v=aj4FEovXVXM
Hope this might help.
Thanks
Hello,
Nios II is a soft-core processor IP available in all FPGA devices. DE-10 Nano is a cyclone V SoC based board. You can create your Nios II application on this FPGA.
You can refer to these links:
https://www.youtube.com/watch?v=WGteIQqNfvY
https://www.youtube.com/watch?v=o-K8VBa0Uk8
Hope this might be helping.
Power etc sould be in the datasheet for the module. Advantages are difficult to say. It depends on your specific application. What are the conditions: low light, distance to object, required framerates etc.
Hello,
TRDB_D5M camera is used widely with Terasic boards. You can refer to the user guide of this module:
https://www.terasic.com.tw/attachment/archive/281/TRDB_D5M_UserGuide.pdf
If you need more information about it, you can ask Terasic.
Thanks
