NativeLink error when try to run RTL simulation

[Chirs888]

Hi,

Get errors when try to run RTL simulation,

The report is:

Info: Start Nativelink Simulation process
Error: NativeLink did not detect any HDL files in the project
Error: NativeLink simulation flow was NOT successful

================The following additional information is provided to help identify the cause of error while running nativelink scripts=================
Nativelink TCL script failed with errorCode: NONE
Nativelink TCL script failed with errorInfo: NativeLink did not detect any HDL files in the project
(procedure "run_eda_simulation_tool" line 1)
invoked from within
"run_eda_simulation_tool eda_opts_hash"

Tool option setting is right and can run .vwf simulation.

Upload .vt file on simulation testbench setting, still error.

Please help me with this error.

THANKS!

[sstrell]

Way more info needed here.  What are your NativeLink settings?  What 3rd-party sim tool are you using and is the path to its executable set up correctly?  Does the Quartus project synthesize correctly?  What's your version of Quartus and target device?

[Chirs888]

Somehow it fixed after restart. Thank you.

[ShengN_Intel]

Hi,

Probably the steps in this document https://www.intel.com/content/www/us/en/docs/programmable/683248/18-0/simulation-quick-start.html can help you understand the nativelink simulation setup flow.

Thanks,

Best regards,

Sheng

[Chirs888]

Somehow it fixed after restart. Thank you.