Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
17254 討論

PL-USB2-BLASTER_SO#233556_Unable to recognize device

VCk00
初學者
3,082 檢視

When connected to USB, the device is recognized as [unknown USB device].

 

*Operation Verification

Verified with PC and USB only, without JTAG terminal connected

 

1)Win11pro desktop : Ver23H2 : Not recognized both by USB direct

connection and self-power HUB

2) Win11pro Laptop: Ver23H2: Not recognized both by direct USB connection

and via self-powered HUB.

3) Win10pro laptop: Ver22H2: Both USB direct connection and via

self-powered HUB are not recognized.

Intel Products Used Quartus Prime 23.1std

All Unknown USB device (device descriptor request failed) code 43

標籤 (1)
0 積分
8 回應
FvM
榮譽貢獻者 II
3,080 檢視

Hi,

did you try to update driver for the unknown device in device manager, manually selecting recent quartus\drivers\usb-blaster-ii folder as driver installation source?

NurAiman_M_Intel
2,901 檢視

Hi,


Please provide the screenshot of the unreconized device message.


Also, have you try to uninstalled and reinstall the USB Blaster driver?


Regards,

Aiman


VCk00
初學者
2,888 檢視

Hello Aiman,

 

Please find the attached images along with the device sn#.

 

Regards,

Venu CK.

NurAiman_M_Intel
2,691 檢視

Hi,


  • May I know from where did you purchase the USB blaster?
  • Have you try the suggested steps above by me and FvM?
  • I do not understand the error message in the picture, please help to translate in english.

Regards,

Aiman



VCk00
初學者
2,487 檢視

Hello Aiman,

 

1. Customer purchased the part from Mouser.

2. Yes, the suggested steps are tried but still the device is not detecting.

3. USB not recognised.

 

Regards,

Venu CK.

NurAiman_M_Intel
2,394 檢視

Hi Venu,


Kindly try below:


  1. Ensure that USB Blaster Adapter connected to the board in correct manner(one to one mapping)
  2. Complete reinstall of Quartus Prime
  3. Running as admin


Another try:


  1. Disconnect other USB device
  2. uninstall and reinstall the usb blaster driver
  3. You can also try this https://www.intel.com/content/www/us/en/support/programmable/articles/000073673.html
  4. If you have another USB Blaster, please try using another one and see if it works.


Regards,

Aiman



NurAiman_M_Intel
2,213 檢視

Hi,


Do you have any further update/inquiries for this case?


Regards,

Aiman


NurAiman_M_Intel
2,083 檢視

We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you


回覆