I'm not familiar with any specific scripts to set up the Altera libraries in VCS. However, I did find a useful design example on the Altera website:
http://www.altera.com/support/examples/vcs/exm-vcs-timing-verilog.html Based on the TCL script that was provided, here's a snit it of the TCL file to setup your simulation:
vcs
# -R
# ## To invoke the GUI, use -RI option
-RI
# ## 64-bit version
# -full64
# ## record all the messages in a log file named test_net.log
-l test_net.log
# ## inlcude the path for libraries required for simulation
-v stratixii_atoms.v
# ## compile the test bench
test_multiplier.v
# ## inlcude the design files
multiplier.vo
# ## include these switches for transporting path delays and internal delays
# ## to get more information on these switches, refer to VCS Userguide
+transport_int_delays
+pulse_int_e/0
+pulse_int_r/0
+transport_path_delays
+pulse_e/0
+pulse_r/0
If you refer to the "include the path for libraries required for simulation", here's the command for adding the Stratix II device library for VCS simulation:
>> -v stratixii_atoms.v
Not sure if this helps, but just my two cents.
-Pld_wiz
