Intel® SoC FPGA Embedded Development Suite
Support for SoC FPGA Software Development, SoC FPGA HPS Architecture, HPS SoC Boot and Configuration, Operating Systems
461 Discussions

Issue in booting DE10-nano with customized image

Ragul
Beginner
164 Views

Error imgError imgHi,


Actually, My requirement is i need to boot my DE10-nano with my customized hardware design for that i followed a document which is recommended by you
in before mail. Using quartus 21.1 tool i generated required files i.e, sof, .dtb, .rbf and so on.


I generated customized bootloader(U-boot) for DE10-nano which configure u-boot to flash fpga automatically at boottime. but i'm not able to generate


preloader so i took that from DE10_nano_xfce standard one and also i took kernal from standard one .With this i tried to boot my De10-nano i gives error.
For your reference i attached an error image.

What may be the problem, please assist me to solve this issue.


with regards,
Ragul V.

0 Kudos
2 Replies
Farabi
Employee
113 Views

Hello,


First need to confirm if the design example work?

link : https://www.rocketboards.org/foswiki/Documentation/DE10NanoDevelopmentBoard


regards,

Farabi


0 Kudos
Ragul
Beginner
99 Views

 

Hello,

 

Booting with GHRD design example's .rbf , .dtb, u-boot.img also I'm encountering same error which is mentioned in before post.

Give me one proper document for how to boot the system with customized hardware design.

 

I followed the below mentioned link to boot my system . It is also useless and also i encountered lots of errors while compiling preload-er, u-boot

https://bitlog.it/20170820_building_embedded_linux_for_the_terasic_de10-nano.html

 

My requirement is i need to configure GPIO's(0 & 1) for HPS .By default it is in FPGA .

Sharing hardware design files for above requirement is appreciable.

 

With regards,

Ragul V.

0 Kudos
Reply