Intel vPro® Platform
Intel Manageability Forum for Intel® EMA, AMT, SCS & Manageability Commander
2783 Discussions

DP45SH wont post - see testing in post


I purchased a DG45SG and have been unable to get the board to post. Below is my configuration:

1) intel DP45SG board with intel quad core 2.5

2) Patriot DD3 memory - 2 sticks of 2gig (4 GIG total) PC3-10666 1333MHZ

3) 400 watt PS

4) Gigabye ATI HD4550 video card

I see on this board that there are numerous problems with this board and memory. I have not updated the bios due to not sure on the exact procedure for performing the update since the computer will not even post.

Below is the testing I performed so far without any luck:

1) Removed all memory and disconnected all but cpu and video card.

Recieved 3 beeps and no video

2) Inserted one stick of RAM with above configuration.

Received no beeps , but no video

3) Reset configuration jumper and restarted.

Same results as # 2

I have many systems over the years and lately using Intel boards almost execlusively without problems, but this one has me stumped. Any help would be appreciatred.

0 Kudos
0 Replies