Intel vPro® Platform
Intel Manageability Forum for Intel® EMA, AMT, SCS & Manageability Commander
2827 Discussions

Looking for a current Document on how to configure a Small PC Network AMT/KVM . The one I found was published in 2010 and does not work.

LRobi16
Beginner
1,464 Views
 
0 Kudos
21 Replies
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

We are sorry to hear that issue that you are having configuring your AMT system, can you please share with us the link that you are referring to?

 

We also would like to share the following video in order to enable Intel(R) Vpro system: 

 

https://www.intel.com/content/www/us/en/support/articles/000026592/technologies.html

 

You can also check the following information:

 

Intel® Setup and Configuration Software (Intel® SCS)

 

https://www.intel.com/content/dam/support/us/en/documents/software/Intel_SCS_User_Guide.pdf

 

Additionally, you can check the Intel® AMT Configuration Utility:

 

https://www.intel.com/content/dam/support/us/en/documents/software/manageability-products/Intel_AMT_Configuration_Utility.pdf

 

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

We appreciate the additional information, did you try the links that we sent you on the previous post and try to setup your AMT system?

 

Additionally, can you please share with us more information about your system configuration? i.e. System model, AMT version, processor, etc.

 

Also, please let us know when exactly are you getting the error message and please share what does the error message says.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

 

 

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

We are following your questions and we would like to know if you need further assistance.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

 

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

We are following your questions and we would like to know if you need further assistance or if we can close this thread.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
Emeth_O_Intel
Moderator
1,189 Views

Hello LRobi16,

 

I hope you find very well.

 

I am following up on your case in order to verify if you still have questions about the Intel Active Management Technology. If so, please let us know and we will be more than happy to assist you.

 

Best regards,

 

Emeth O.

Intel Server Specialist.

0 Kudos
LRobi16
Beginner
1,189 Views
I attempted to install the a small PC Network using the instructions sent to me but is failed to create the bootable flash drive. The Active Manager wizard was installed on a server and the flash drive was created by that application. We need this to work as we have an Imaging and Packaging testing lab for several International clients and would like to use this replacing IP/KVMs that require expensive connectors and do not work on all laptops or desktops. We use these units to give remote access to off shore imagers and packagers, I used Flash drives that were under 2 GB. I followed the Video installing Active Management.
0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

We are sorry to hear about your inconvenience.

 

Can you please let us know how many systems are you trying to install AMT?

 

Additionally, can you please share with us more information about your system configuration? i.e. System model, AMT version, processor, etc.

 

Also, please let us know when exactly are you getting the error message, and please share what does the error message says. If possible please provide us a screenshot of the error message.

 

You can also check the following URL, in order to setup AMT:

 

https://www.intel.com/content/dam/support/us/en/documents/software/Intel_SCS_User_Guide.pdf Page 85.

 

 

Best regards,

Sergio S.

Intel Customer Support Technician

0 Kudos
LRobi16
Beginner
1,189 Views
We have several clients that have up to 40 PCs. They are all on an isolated vLan for each client with a server on the data floor connected to the client vLan. I am working from home for three weeks and cannot start the user’s guide in the Testing Lab until that passes. We are observing Corona Viral protocols so my co-worker is in the lab for these three weeks. I will start the User’s Guide, Page 85 when I go back to the Lab.
0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

No problem, we are going to keep this thread open as long as you need. I will follow up with you next week or if you prefer a specific date please let me know.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

I am following your question, and we would like to let you know that we are going to keep this case open.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
LRobi16
Beginner
1,189 Views

Thank you, I will be back in the Lab in two weeks (internal COVID-19 protocols) and able to run the install on a server.

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

I hope this message finds you safe, I will follow up with you in 2 weeks.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

We hope this message finds you safe, we are following your issue and we would like to know if you were able to follow the steps that we provided you on our previous posts.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
LRobi16
Beginner
1,189 Views

I will be in the Lab 6/8/2020 and will install AMT via the users guide again as per page 85.

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

No problem I will follow up your thread on 6.15.20

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

I am following your question, and we would like to let you know if you were able to perform the tests and install AMT.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
LRobi16
Beginner
1,189 Views
I just now got to the Lab for this week but I am involved in other things right now. I will try to install it this week.
0 Kudos
SergioS_Intel
Moderator
1,189 Views

Hello LRobi16,

 

No problem I will follow up your thread on 6.26.20.

 

Best regards,

Sergio S.

Intel Customer Support Technician

 

0 Kudos
Emeth_O_Intel
Moderator
920 Views

Hello LRobi16,


I am contacting you on behalf of my co-worker Sergio.


I was reviewing your thread and I would like to know if you have some questions or additional information to share with us.

If so, please let us know and we will be more than happy to proceed with the next step.


Regards,


Emeth O.

Intel Server Specialist.


0 Kudos
Reply