Intel vPro® Platform
Intel Manageability Forum for Intel® EMA, AMT, SCS & Manageability Commander
2827 Discussions

intel AMT computer don't Remote Power UP

idata
Employee
1,433 Views

AMT hardware configuration

CPU:E6550

Motherboard:DQ35MPE, BIOS version:JOQ3510J.86A.0191.2007.0427.1530, 82566DM LAN

i use intel amt dtk tools:Intel AMT Commander

command Success

power down yes

Normal reboot yes

pwoer Up no(after send "Power down" command, ping Target computer is not success)

In addition, AMT status indicator lights have been flickering

Manual instructions AMT in the M1 state

Is this why?

M1 state what is the meaning?

0 Kudos
1 Reply
Brian_Cockrell
Employee
565 Views

Try the following to resolve your issue:

1. Update your BIOS. The BIOS version you are using is very old. The latest BIOS is available here: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&Inst=Yes&ProductID=2784&DwnldID=15268&strOSs=All&OSFullName=All%20Operating%20Systems&lang=eng

2. Navigate to "Intel Management Engine Configuration" in your ME/BIOS. Ensure that "Turn on Intel Me in Sleep States" is set to "Always/Enabled". If it is set to "Never/Disabled" then the ME will turn off when the PC enters a sleep state and you will not be able to power it up.

0 Kudos
Reply