Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12603 Discussions

BSP build - Configuring BSP search path

Arthur_Davidov
Beginner
1,066 Views

Hi,
I have a problem same as described here  and the suggested solution is to edit configuration path.
In " Nios II Software Developer’s Handbook "  NII5V2-13.1  p.42 there is an explanation for  'Configuring Component Search Paths'. The problem is that I cant locate the objects that are supposed to be.

My tools--> options view:

 


"The BSP component search paths:" isn't a link/button.
What I am missing?

0 Kudos
1 Solution
Eliath_G_Intel
Employee
1,005 Views


Hi!


yes , that is correct.

an example of this is :


$  nios2-bsp-editor.exe --librarian-path=/mnt/c/temp:$


after running this command with the new path, the BSP editor search path window will open and you'll see the new search path updated.


please let me know any questions you may have.

Regards,

-Eliath Guzman


View solution in original post

0 Kudos
5 Replies
Eliath_G_Intel
Employee
1,044 Views

Hi Jerusalem,

First of all, thanks for reaching us.


Regarding the issue, can you please tell me what the version you are using is?

so I can try to reproduce the issue to see what exactly is happening.


Regards,

-Eliath


0 Kudos
Arthur_Davidov
Beginner
1,038 Views

Thanks for your response.
I tried to edit searching path on NiosII: v17, v15.1v, v14.1

0 Kudos
Eliath_G_Intel
Employee
1,028 Views

Hi!


Please try the next workaround.


Launch Nios II BSP editor from commandline

nios2-bsp-editor --librarian-path=/your/custom/search/path:$

where:

--librarian-path <directory> Comma separated librarian search path. Use '$'

            for default search path


please let me know any questions you may have.


Regards,

-Eliath Guzman


0 Kudos
Arthur_Davidov
Beginner
1,018 Views

Do you mean:
nios2-bsp-editor --librarian-path=/path1:$/path2:$path3:&

path1 = /users/myname/intel/x

path2 = /users/myname/intel/y

path3 = /users/myname/intel/z

 

How can I validate the current search path?

0 Kudos
Eliath_G_Intel
Employee
1,006 Views


Hi!


yes , that is correct.

an example of this is :


$  nios2-bsp-editor.exe --librarian-path=/mnt/c/temp:$


after running this command with the new path, the BSP editor search path window will open and you'll see the new search path updated.


please let me know any questions you may have.

Regards,

-Eliath Guzman


0 Kudos
Reply