Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21206 Discussions

Application Engineer. Stratix GX EPISGX10D upgrade support wanted.

John_Whitcraft_Comp_E
1,186 Views

The subject device and associated flash EPC8QI100 are obsolete. What is the correct device set  to use now for redesign? Please give me contact information for an Application Engineer.

0 Kudos
1 Solution
Fakhrul
Employee
1,115 Views

Hi John_Whitcraft_Comp_E,


Since Stratix GX EPISGX10D is a very old device, I would suggest you check the following Stratix lineup which may have the right features that are applicable to your application.


Intel® Stratix® Series FPGAs and SoCs


Regards,

Fakhrul



View solution in original post

0 Kudos
7 Replies
Fakhrul
Employee
1,167 Views

Hi John_Whitcraft_Comp_E,


As per PRODUCT DISCONTINUANCE NOTIFICATION PDN1708, I'm afraid to tell you that there's no replacement for EPC8QI100.


Regards,

Fakhrul


0 Kudos
John_Whitcraft_Comp_E
1,143 Views

I agree. You are correct.

I'm looking for Stratix GX EPISGX10D upgrade support, please.

When I redesign the product, which FPGA and configuration device from the current offering shall I use?

0 Kudos
Fakhrul
Employee
1,116 Views

Hi John_Whitcraft_Comp_E,


Since Stratix GX EPISGX10D is a very old device, I would suggest you check the following Stratix lineup which may have the right features that are applicable to your application.


Intel® Stratix® Series FPGAs and SoCs


Regards,

Fakhrul



0 Kudos
John_Whitcraft_Comp_E
1,101 Views

Hello Fakhrul,

Thanks for the response.

Please provide a more comprehensive matrix of "Intel® Stratix® Series Common Features" going back to Stratix 2002 showing the features similar to that on the link (which only shows back to Stratix iv.)  Note: clicking the "--- View All ^ ---" link currently does nothing on that page.

 

0 Kudos
Fakhrul
Employee
1,066 Views

Hi John_Whitcraft_Comp_E,


Could you provide the specs, how many channels for the transceiver, the xcvr speed, etc, so we could suggest a suitable board for you?

Based on my observation, Stratix GX is perhaps equivalent to Cyclone 5 only.


Regards,

Fakhrul




0 Kudos
John_Whitcraft_Comp_E
1,038 Views

Fakhrul,

Thanks for the observation!

0 Kudos
Fakhrul
Employee
1,017 Views

Hi John_Whitcraft_Comp_E,


Thanks for your response. Do you still have further inquiries on this issue? Please feel free to let me know if there is any concern so that we could further assist you.


Otherwise, this thread will be idling and marked as inactive, thus it will be transitioned to community support because there is no update received from you in a while.


Regards,

Fakhrul



0 Kudos
Reply