Cyclone V GX Starter Kit: ADC Demonstration doesnt work

Programmable Devices

CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers

Cyclone V GX Starter Kit: ADC Demonstration doesnt work

1,131 Views

Hey,

i have just started with the Cyclone V GX Starter Kit. My Company wants me to find out wether a Signal can be read by the ADC to measure some physical stuff. Therefore i started by using the C5G User Manual. As i can see in the Control Panel the ADC is perfectly working, but if i want to try out the ADC Demonstration (C5G_SystemCD/Demonstrations/C5G_ADC/demo_batch/C5G_ADC.bat) it prints out some weird Channel Values. What can i do there to fix this Problem?

short:

1.Power on the Boad and Switch to RUN

2.Open up C5G_ADC.bat (everything green...)

3.Connect the Potentiometer DC Voltage to the ADC-Pins (like it works in the Control Panel)

4.SerialPrint Input values are wrong?!

Thanks in Advance!

Link Copied

0 Replies

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.