Cyclone V SoC FPGA boot from QSPI。

[TBaox]

I build a barematel program.I want boot this from QSPI flash.

It can run well at DE1-SOC development board.

BUT at our own PCB, it stop when HPS write FPGA PIO.

Is it a boot problem?

I stop here for a long time, hope your reply!

[Eliath_G_Intel]

Hi !

First of all , thank you for reaching us,

Do you have any .log file you can share with us so i can take a look and help you?

Regards,

[TBaox]

nope

I have a .PDF file. 

It record something that is wrong.

But it is writen by chinese.

I just present it for you.

[Eliath_G_Intel]

Hi,

Please take a look at the following documentation https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/cyclone-v/cv_54012.pdf#page=1116

Regards,

[Eliath_G_Intel · Accepted solution]

Hi!,

Hoping you're doing well , please take a look at the following tutorial/documentation about how to boot from QSPI for Cyclone V and the Documentation for building your Bare-metal project properly.

https://rocketboards.org/foswiki/Documentation/BuildingBootloader#Cyclone_V_SoC_45_Boot_from_QSPI

https://rocketboards.org/foswiki/Documentation/SoCEDS#Cyclone_V_Bare_Metal_Example_Using_SoC_EDS_Standard_Edition

regards,