Cyclone V Soldering Process

[Binoyjohnson]

Hi,

We are using cyclone V (5CSEBA4U23I7N) in one of the project. Is it recommended to assemble the SOC in the first reflow process?. Is there any problem, if the SOC pass through the second reflow it includes DDR as well, in terms of reliability. We are following the lead free reflow process.

Thanks Regards

Binoy Johnson 

[NazrulNaim_Intel]

Hello,

To answer your request. For reflow profile, we follow the Industrial Standard – IPC/JEDEC: J-STD 020E or newer.

Regards,

Nazrul Naim

[Binoyjohnson]

If you can answer with Industrial Standard – IPC/JEDEC: J-STD 020E a screenshot it would be great 

[NazrulNaim_Intel]

Hello,

Sorry for the delay. For your information the information for this one can be directly obtained from the JEDEC official website.

Hope that answers your question.

Best regards,

Nazrul Naim

[NazrulNaim_Intel]

Hi,

As we do not receive any response from you on the previous question/reply/answer that we have provided, for now I will set this case to Close-Pending. 

Regards,

Nazrul Naim

[Binoyjohnson]

If you can arrange screenshot, it would be great. I couldn't get the information.