DDR4 VTT termination for ADDRESS/CONTROL - ARRIA10 HARD IP

[LSOCH]

Hi ,

if i have a single x16 DDR4 component connected to a ARRIA10  device and running at 800 Hz clock(1600 MT\S ) - is there a waiver that allow me to not have a VTT termination for the ADDRESS\CONTROL signals ?

Are you familiar with designs which have done that?

Thanks,

Lior

[yoichiK_intel]

You will need to run the Board simulation if you wish not to terminate the ADR/CMD to VTT.