Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21592 ディスカッション

DE10-Nano SoC LXDE and custom FPGA

MR3
ビギナー
1,402件の閲覧回数
Good day All, I have tried to program the "my_first_fpga" program available on the SystemCD using the USB Blaster, however that stops my Linux kernel (I am assuming it stops running the soc_system.rbf file). I would like to know if it is possible to run a custom FPGA SoC program (a program that uses the FPGA and HPS) on a DE10-Nano SoC running the LXDE version (obtained from Terasic)? Regards, M
0 件の賞賛
6 返答(返信)
JingyangTeh_Altera
従業員
1,384件の閲覧回数

Hi MR3


Sorry you cant flash a custom FPGA SOC program(FPGA & HPS) and have the Linux LXDE running.

However, you could flash only a custom FPGA portion and still have the Linux LXDE running.



Regards

Jingyang, Teh



JingyangTeh_Altera
従業員
1,374件の閲覧回数

Hi MR3


Sorry for the confusion.

After digging further I found some new information.


It is possible to run a bare-metal program and running the Linux Distribution.

DE10 has a Cyclone5 SOC which has a dual CortexA9.

Theoretically it is possible to run a bare-metal program on one core and a Linux Distribution on another.

However we do not support Asymmetrical Multiprocessing.



Regards

Jingyang, Teh



JingyangTeh_Altera
従業員
1,338件の閲覧回数

Hi MR3


Good day!

Do you need any more clarification on this forum?


Regards

Jingyang, Teh


Mahesh2
従業員
1,317件の閲覧回数
Farabi
従業員
1,259件の閲覧回数

FROM 05527487

 

Customer confirmed accepted the solution. You can close this case now. 

 

Author: MR3
Subject: Reply to DE10-Nano SoC LXDE and custom FPGA
Date Posted: July 12, 2022

Hi , I am unable to reply to the post
(https://community.intel.com/t5/Programmable-Devices/DE10-Nano-SoC-LXDE-and-custom-FPGA/m-p/1397551#M85758)
as I am getting a "Authentication failed" message whenever I reply or
try to accept a solution. I just wanted to acknowledge that I will not
need any further clarification. Thank you for your help. Regards.

返信