Drivers Not Recognized

[benjhill]

I'm working on a device with Windows 11, using Quartus Prime Lite 23.1 std along with an Altera MAX V Development Kit. I installed all the proper drivers but the board is still not recognized in the device programmer. In device manager, it shows up under Other Devices as USB-Blaster with a usb icon with a small warning icon appended to it. Does anyone know a fix for this? Would using the 24.1 std edition fix this issue?

[Fakhrul]

Hi,

There are several similar threads with solutions that you may find helpful. Please refer to the links below:

https://community.intel.com/t5/Programmable-Devices/Altera-USB-BLASTER-is-not-recognized-in-device-manager/m-p/1443735

https://community.intel.com/t5/Intel-Quartus-Prime-Software/Can-t-use-USB-Blaster-on-Windows-11-without-disabling-core/m-p/1655217

https://community.intel.com/t5/Intel-Quartus-Prime-Software/USB-Blaster-driver-in-Quartus-23-1-is-not-signed-for-Windows-11/td-p/1630396

Regards,

Fakhrul

[Fakhrul]

As we haven't received a response to our previous notification, this thread will be transitioned to community support. We hope all your concerns have been addressed. If you have any new questions, please feel free to open a new thread to receive support from Intel experts. Otherwise, community users will continue to assist you here. Thank you.