Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20641 Discussions

EPCS128 Programming

Altera_Forum
Honored Contributor II
1,188 Views

i want to program epcs128 via jtag  

what should i do?
0 Kudos
9 Replies
Altera_Forum
Honored Contributor II
380 Views

What board you are using? 

You can use .jic file and USB blaster cable. Go to File-> Convert Programming File. Convert your .sof file to .jic.
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

i design my own board 

i use cylcon v 5ceba9f23c8 

i programming fpga via jtag (its work but very slowly) 

after that i convert sof file to jic and start to programming when the programming reach 97%  

its failed !!!
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

What error message you get when it fails?  

 

I recomend reading "Configuration, Design Security, and Remote System Upgrades in Cyclone V" chapter from Cyclone V handbook.
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

i find problem my problem is power 

now i fixed but i now another problem  

when i programm sof file everything is ok 

but when i programm jic file nothing happend (jic file programm and reach to 100%) 

 

(i read Configuration, Design Security, and Remote System Upgrades in Cyclone V" chapter from Cyclone V handbook)
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

i find my problem if anyone have problem like me can contact me  

email:khatibshahidi.hamid@gmail.com
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

 

--- Quote Start ---  

i find my problem if anyone have problem like me can contact me  

email:khatibshahidi.hamid@gmail.com 

--- Quote End ---  

 

 

What's the problem you met? And how did u deal with it? 

 

Do u think you can use other chip to replace epcs128 to save cost? EPCS128 is too expensive.
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

 

--- Quote Start ---  

What's the problem you met? And how did u deal with it? 

 

Do u think you can use other chip to replace epcs128 to save cost? EPCS128 is too expensive. 

--- Quote End ---  

 

 

 

all my problem is related to power design i use tps54310  

my program file is to big and i need the epcs128  

i design DRM
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

 

--- Quote Start ---  

all my problem is related to power design i use tps54310  

my program file is to big and i need the epcs128  

i design DRM 

--- Quote End ---  

 

 

I mean that you can select other company's part instead of altera's, which has same memory sizes.
0 Kudos
Altera_Forum
Honored Contributor II
380 Views

yes you can use another brand but not all of them  

you should disable id check when you want to programm 

also you can use microcontroller for programming
0 Kudos
Reply