Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20693 Discussions

Filter Error (11999): Channel(s) under reference clocks:

Altera_Forum
Honored Contributor II
‎02-14-2016 05:29 AM
1,024 Views

the device 10ax115u3f45e2sge3 have 96 HSSI, but when i use >48, filter error  

 

Error (11999): Channel(s) under reference clocks: are 0 tx channels, 72 rx channels, which exceeds the capacity for the targeted device's HSSI strip, 48 channels. 

 

why?
0 Kudos

Link Copied

1 Reply
Altera_Forum
Honored Contributor II
‎02-14-2016 06:16 AM
220 Views

You are correct that there are 96 transceivers. However you always must pay attention to the FPGA layout. 

 

For the Arria 10 that you are using, there are 48 transceivers on the left side and the other 48 are on the right side. 

 

Transceivers on the left cannot share the same reference clock as transceivers on the right.
0 Kudos
Copy link
Reply

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.