Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21611 Discussions

Generating a Motorola S-Record file for pre-programming CFI flash config PROM

Altera_Forum
Honored Contributor II
‎09-16-2013 03:59 PM
1,265 Views

Now that we have our product working nicely I need to generate a Motorola hex file (S-record) for a third party service to use to pre-program Spansion CFI flash PROMs that we use to configure a Cyclone IV EP4CGX50. 

 

What is the proper process for generating the S-Record file? 

 

I tried running the POF file through the quartus_cpf.exe utility to generate an Intel hex format file and then ran the resulting file through srec_cat, a conversion utility for linux, to generate the Motorola S-Record file. The third party used that to program a first article device but unfortunately that didn't work. A readback comparison of the pre-programmed part shows differences from the original POF. 

 

Thanks.
0 Kudos

Link Copied

0 Replies
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.