Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20878 Discussions

How to connect 2 DDR3 interfaces to FPGA ?

rshal2
New Contributor II
710 Views

Hello,

 

Is there a description and example for connecting 2 DDR3 interfaces to FPGA ?

 

Thank you,

Ran

0 Kudos
1 Solution
HBhat2
New Contributor II
451 Views

Hi,

If you are using Arria 10 FPGA, refer to the below document

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-20115.pdf page 38, "2.6. Hardware Resource Sharing Among Multiple EMIFs " and "Figure 17. I/O Bank Sharing "

Similarly, there should be documents for other FPGAs.

https://www.intel.com/content/www/us/en/programmable/support/literature/lit-external-memory-interface.html

 

With Regards,

HPB

View solution in original post

0 Kudos
1 Reply
HBhat2
New Contributor II
452 Views

Hi,

If you are using Arria 10 FPGA, refer to the below document

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-20115.pdf page 38, "2.6. Hardware Resource Sharing Among Multiple EMIFs " and "Figure 17. I/O Bank Sharing "

Similarly, there should be documents for other FPGAs.

https://www.intel.com/content/www/us/en/programmable/support/literature/lit-external-memory-interface.html

 

With Regards,

HPB

0 Kudos
Reply