Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
Announcements
All support for Intel NUC 7 - 13 systems has transitioned to ASUS. Read latest update.
20590 Discussions

Intel Cyclone 10 LP TDI and TMS

LakshmiPriya
Beginner
744 Views

Hi,

It looks like the TDI and TMS are internally pulled up to VCCIO (3.3V), but when we want to flash the FPGA through intel download cable, the voltage levels are all at 2.5V. This will cause a conflict in voltage levels? Is there a way to disable the internal pull ups on these 2 lines?

Thanks,

Priya

0 Kudos
2 Replies
Farabi
Employee
706 Views

Hello, 

 

Please refer to this : https://www.intel.com/content/www/us/en/docs/programmable/683546/current/pull-up-and-pull-down-of-jtag-pins-during.html

 

You can't disable the internal weak pullup. You can change the VCCIO of the IO bank or change VCC of the JTAG signal. 

 

Side notes: There will be no contention between 3.3V and 2.5V as the Vih/Vil is the same. 

 

regards,

Farabi

0 Kudos
Farabi
Employee
706 Views

Hello, 

 

I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

 

regards,

Farabi

0 Kudos
Reply