Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21333 Discussions

Is any document about MAX 10 I/O performance for TTL/CMOS standard?

SYang9
Partner
‎12-12-2018 01:25 AM
1,452 Views
 
0 Kudos

Link Copied

1 Reply
ChiaLing_T_Intel
Employee
‎12-13-2018 02:41 AM
585 Views

Hi,

 

For your information, Intel FPGA will discontinue publishing the I/O toggle rate specifications in the device datasheet because the actual achievable I/O signaling frequencies depends on design and system specific factors.

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd01132009_577.html

 

The toggle rate would base on the I/O performance target with specified maximum drive strength and load. The actual achievable I/O signal frequencies depends on design and system specific factors and is best determined using HSPICE/IBIS simulations.

https://www.intel.com/content/www/us/en/programmable/support/support-resources/download/board-layout-test/ibis/ibs-ibis_index.html

Should you have any further feedback or concern, do feel free to drop me a note.

 

Thank you

 

Regards,

Chia Ling 

0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.