Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Altera_Forum
Honored Contributor I
939 Views

Uboot issue

Hello, 

i have created a design in Qsys and want to boot it through SD card. 

 

I have created the files required for booting and I have put them in SD card. But I get the following error: 

 

U-Boot 2014.10 (Sep 20 2017 - 20:23:08) 

 

CPU : Altera SOCFPGA Arria 10 Platform 

BOARD : Altera SOCFPGA Arria 10 Dev Kit 

I2C: ready 

DRAM: WARNING: Caches not enabled 

SOCFPGA DWMMC: 0 

** No partition table - mmc 0 ** 

Failed to set filesystem to FAT. 

Flash probe failed. 

INFO : Skip relocation as SDRAM is non secure memory 

Reserving 2048 Bytes for IRQ stack at: ffe386e8 

data abort 

pc : [<ffe00cc2>] lr : [<ffe02331>] 

sp : ffe3def8 ip : 0000001c fp : 00000001 

r10: ffd02078 r9 : ffe3ff38 r8 : ffe00054 

r7 : ffe20c94 r6 : ffe20c40 r5 : 00000000 r4 : ffffd000 

r3 : ffcfb000 r2 : 00000002 r1 : 00000001 r0 : 00000001 

Flags: nzcv IRQs off FIQs off Mode SVC_32 

Resetting CPU ... 

 

resetting ... 

 

U-Boot 2014.10 (Sep 20 2017 - 20:23:08) 

 

CPU : Altera SOCFPGA Arria 10 Platform 

BOARD : Altera SOCFPGA Arria 10 Dev Kit 

I2C: ready 

DRAM: WARNING: Caches not enabled 

SOCFPGA DWMMC: 0 

** No partition table - mmc 0 ** 

Failed to set filesystem to FAT. 

Flash probe failed. 

INFO : Skip relocation as SDRAM is non secure memory 

Reserving 2048 Bytes for IRQ stack at: ffe386e8 

data abort 

pc : [<ffe00cc2>] lr : [<ffe02331>] 

sp : ffe3def8 ip : 0000001c fp : 00000001 

r10: ffd02078 r9 : ffe3ff38 r8 : ffe00054 

r7 : ffe20c94 r6 : ffe20c40 r5 : 00000000 r4 : ffffd000 

r3 : ffcfb000 r2 : 00000002 r1 : 00000001 r0 : 00000001 

Flags: nzcv IRQs off FIQs off Mode SVC_32 

Resetting CPU ... 

 

resetting ... 

 

It goes into infinite loop. and I am not able to boot the system. Any idea on this?  

** No partition table - mmc 0 ** 

Failed to set filesystem to FAT. 

 

 

What does this mean?
0 Replies
Reply