Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
公告
FPGA community forums and blogs on community.intel.com are migrating to the new Altera Community and are read-only. For urgent support needs during this transition, please visit the FPGA Design Resources page or contact an Altera Authorized Distributor.
21615 讨论

factory recovery in QUARTUS 10.1

Altera_Forum
名誉分销商 II
1,742 次查看

Hi 

I want to make the ep3c120_dev_kit to the factory default setting based on the cyclone III development kit, but i can not find this pof file. I use QUARTUS 10.1 

 

Could anyone help me to find this pof file: 

cycloneiii_3c120_dev_factory_recovery.pof 

 

thanks.
0 项奖励
5 回复数
Altera_Forum
名誉分销商 II
712 次查看

Did you try the download on the kit's web site? 

 

http://www.altera.com/products/devkits/altera/kit-cyc3.html 

 

Cheers, 

Dave
0 项奖励
Altera_Forum
名誉分销商 II
712 次查看

Can u send me a specific path to find thid file in QUARTUS 10.1. I can't find it in web

0 项奖励
Altera_Forum
名誉分销商 II
712 次查看

 

--- Quote Start ---  

Can u send me a specific path to find thid file in QUARTUS 10.1. I can't find it in web 

--- Quote End ---  

 

 

The links are on the page I gave you. Here they are directly: 

 

ftp://ftp.altera.com/outgoing/devkit/11.0/cycloneiii_3c120_dev_kit-v11.0.0.exe 

ftp://ftp.altera.com/outgoing/devkit/10.1/cycloneiii_3c120_dev_kit-v10.1.0.exe 

ftp://ftp.altera.com/outgoing/devkit/91/cycloneiii_3c120_dev_kit-v9.1.2.exe 

 

As you can see, they have the Quartus version embedded in their name. Quartus 10.1 is the second one. 

 

Cheers, 

Dave
0 项奖励
Altera_Forum
名誉分销商 II
712 次查看

Thank you dwh@ovro.caltech.edu . I downloaded this file for Quartus 10.1. But i don't know where is the file factory ? I go the link C:\altera\10.1\kits\cycloneIII_3c120_dev\factory_recovery. I can't find the file cycloneiii_3c120_dev_factory_recovery.pof. Help me (http://www.alteraforum.com/forum/member.php?u=21847)

0 项奖励
Altera_Forum
名誉分销商 II
712 次查看

 

--- Quote Start ---  

I go the link C:\altera\10.1\kits\cycloneIII_3c120_dev\factory_recovery. I can't find the file cycloneiii_3c120_dev_factory_recovery.pof. Help me  

--- Quote End ---  

A .pof file is for an Altera FPGA configuration device. An FPGA would use an .sof file. If the FPGA is configured from external flash, then that flash would be programmed with the FPGA image in a board-specific manner. 

 

The board has a MAX II device on it connected to Flash. That device will program the FPGA at power-on. This board would not use .pof files. 

 

I'd recommend programming the FPGA with the Board Update Portal (BUP) .sof image, and then connecting to the board via the web interface. From there you should be able to program a new image into the Flash. The BUP image should be the one located in the factory_recovery folder, its called bup_3c120_fpga.sof. So long as that image does not expect data in flash (eg., the web pages it serves), it should be enough to get you started. 

 

Cheers, 

Dave
0 项奖励
回复