- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
Hi to all. I've bought an ASUS A551L-XO529H laptop with with 1TB of HDD + 24GB of SDD. I've installed the Intel Rapid Storage software (version 13.2.4.1000) but there is no accelerate button in the performance tab.
That's my disk setup:
I've a doubt: the SSD is formatted as OEM Partition. This setting is correct? Should not to be set "unallocated" instead?
Thanks in advance (and sorry for my english!)
링크가 복사됨
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
Thanks for joining the Chipset community.
If your SSD was previously accelerated and you installed new operating system without disabling acceleration, it may be a possibility that some metadata is still stored on the SSD.
In order to enable acceleration again, you will need the disk set as unallocated.
Allan.
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
Hi, thank you for your reply. I haven't installed a new operating system, that's the original provided with the laptop. But I found a software preinstalled called "ExpressCache": is it possible that this software manages my SSD instead of Intel Rapid Storage?
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
I recommend contacting your computer manufacturer as they are familiar with the bundled software available for your computer model.
Allan.
