After I unplugged two NIC-cables on GZ2600 platform the "Physical Scrty" was triggered. I dont need these phyiscal links anymore so I dont need these events asserted
I have no idea how I can deassert them. I tried manually deassert these events:
# ipmitool event "Physical Scrty" "System unplugged from LAN" deassert
Finding sensor Physical Scrty... ok
0 | Pre-Init |0000000000| Physical Security # 0x04 | System unplugged from LAN | Deasserted
But the sensor is still alive (0x1000 <- bitmask should be zero)
# ipmitool sensor |grep 'Phy'
Physical Scrty | 0x0 | discrete | 0x1000| na | na | na | na | na | na
SEL shows assert/deassert events though
Web interface for bmc is poor. I can not find corresponding button to reset the sensor there
Could you please advise me how can I get rid of this event ?
Here is my BMC info:Device ID : 33Device Revision : 1Firmware Revision : 1.20IPMI Version : 2.0Manufacturer ID : 343Manufacturer Name : Intel CorporationProduct ID : 73 (0x0049)