Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4931 Discussions

I can't get into the RAID Controller BIOS

RKepn
Novice
2,449 Views

hello all ,

 

i cannot get into raid controller bios during boot please help bellow some pictures image firmware version.pngbios.pngbios 2.png

0 Kudos
3 Replies
RKepn
Novice
2,262 Views

Server System is R2312GZ4GC4 and Integrated RAID Module RMS25CB080

 

 

0 Kudos
SergioS_Intel
Moderator
2,262 Views

Hello RKepn,

 

The interactive technical support for the Intel® Server Board S2600GZ you have requested has been discontinued. We can provide you with resources and self-service support information through our website. 

 

We highly suggest that you get information from the technical product specification site and all available technical information is included in the support site. 

 

https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/s2600gzgl_tps_r2_4.pdf

 

I am going to proceed and move your thread to the Discontinued Products Community, so you can get recommendations from fellow community members. 

 

Additionally, you can access the RAID BIOS by following these steps:

 

1. Go to motherboard BIOS

2. Close the quiet boot

3. Choose the RAID model

4. Choose the Intel® RSTE (Intel® Rapid Storage Technology enterprise).

5. Save and reboot

6. Transfer "ctrl I" to go into the RAID configuration interface.

 

https://www.intel.com/content/www/us/en/support/articles/000034677/server-products/legacy-server-products.html

 

 

Best regards,

Sergio S.

Intel Customer Support Technician

A Contingent Worker at Intel

For firmware updates and troubleshooting tips, visit :https://intel.com/support/serverbios

0 Kudos
LTill
Beginner
2,261 Views

Use CTRL+G as normally (or the correct combination for your RAID cardto request the RAID Card BIOS Console as normal. In addition, enter the motherboard boot menu. This can usually be done before and/or after the RAID Card initialisation screen has been displayed. On most Intel server boards, the boot menu key is F6. talktowendys

0 Kudos
Reply