- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi just bought and install a intel server with R1304BTLSHBN chassis and S1200BTL board. It's include RMM4 module and Intel Dedicated Server Management Network Interface Card.
I have one doubt about configuration ot these modules. In BIOS / Integrated BMC Web Console, there is two IP/DNS/Gateway configuration, one for BMC, and one for Intel RMM4. Server will be managed remote, I try settings first one BMC, and can manage, but it's necesary to setup Intel RMM network?.
Which is the different between both method?
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can use either of them to manage the server. Both are connected to the BMC, but RMM4 has a dedicated physical NIC port. But remember not to configure the BMC channel 1 and the RMM4 in the same IP subnet. If you need only one management port, it's recommended to use the RMM4 port.
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can use either of them to manage the server. Both are connected to the BMC, but RMM4 has a dedicated physical NIC port. But remember not to configure the BMC channel 1 and the RMM4 in the same IP subnet. If you need only one management port, it's recommended to use the RMM4 port.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I think I only need one management port, so will use RMM4.
I don't know why you must require two differents ip to manage, surely I will set both port one for x.x.X.1 and other with x.x.Y.2
Thanks
![](/skins/images/D3C0B914909A6564BBB97F4AD1ED1973/responsive_peak/images/icon_anonymous_message.png)
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page