- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Support for this motherboard has ended. This board had been purchased 02/01/2007. However, with the release of Windows Server 2008 R2, it's like breathing new life into a server that still has adequate speed. Currently I have an Intel Core 2 Duo Processor in the system with still room to grow.
Sadly, there is no W2K8 R2 driver for the Intel Embedded RAID, Intel® ICH7R I/O Controller.
Hey INTEL!!! Can you make a driver please??? I purchased your board with the consideration that I could later upgrade it keeping up with technology. Thanks in advance.
As for other readers, if you know of a 3rd party driver source, please point me in the right direction.
Superman808
Link Copied
- « Previous
-
- 1
- 2
- Next »
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
http://usdn-free.nodevice.com/7dea66eac52163f858e8c6881c7c5900 http://usdn-free.nodevice.com/7dea66eac52163f858e8c6881c7c5900
Future reference...I just download the above file and will apply on Monday.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please dog, can you send me that RAID Driver to my e-mail address.
I've really suffered for a long time. Can you ZIP it and send them to me.
Please!! Please!! Pease!!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Fred....your profile is not accessible. I think you have to activate your account so I can view your email address.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Just install windows 2003 and then upgrade it to 2008 R2. It's worked for me several times
Bill
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi! Hello from Russia!
I have the same problem with S3000AH and Server 2008 R2 matrix RAID!!! Could you please upload this driver to rapidshare or some site like this?
Thanks a lot!!!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
http://ctrlaltdel-usa.net/support/sata_ICH7R_LSI_RAID_Win_4402082008.zip http://ctrlaltdel-usa.net/support/sata_ICH7R_LSI_RAID_Win_4402082008.zip
Sorry for the delay in response. I had this server offline for several months and finally got it back on. Anyway, I believe the above link has the unapproved but working drivers.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi! I solve my problem 3 weeks ago. My RAID worked on LSI controller! It was my mistake? When I change in BIOS RAID to Intel Matrix Raid - it starte work in Server 2008 R2! (I don't remeber what driver I used, because I had a lot of Intel's driver for Martix. But one of them helped me!). So, s3000AH with Intel Matrix RAID - work! Good luck!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The Intel Matrix RAID is a software RAID. LSI is hardware RAID. Check this out and see what applies to you:
http://www.cyberciti.biz/tips/raid-hardware-vs-raid-software.html http://www.cyberciti.biz/tips/raid-hardware-vs-raid-software.html
I prefer hardware RAID
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've just installed Windows Server 2008 R2 on Intel S3000AHLX.
It was clean install. Thank to manual on Windows Vista driver for LSI RAID.
I've take it from here
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Server+Boards&ProductProduct=Intel%C2%AE+Server+Board+S3000AH http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Server+Boards&ProductProduct=Intel%C2%AE+Server+Board+S3000AH
Windows Vista -> Drivers -> Software RAID Drivers for Microsoft Windows
Windows setup determine LSI RAID Storage.I can't explain that Vista drivers can work on Windows Server 2008 R2. But they do!
I'm happy!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yeah Baby!! We have a WINNER!! Thanks Doc...you ROCK!
Got the RAID drive to be recognized on the Windows Server 2008 installation!! Works like a charm. Perhaps Intel may want to grab the file and incorporate into their driver set and make a whole bunch of Server Admins happy!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
i have the same problem
you are my salvation
you can send me the mail drives, please
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- « Previous
-
- 1
- 2
- Next »