Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4931 Discussions

Unable to boot to IDA v5 on S2600CP

KCyph
Beginner
‎08-30-2013 05:53 PM
1,245 Views

I've been pulling out my hair trying to solve this, a new S2600CP Board, dual Xeon E5-2630s, is unable to boot to the IDA v5. I've tried several different types of media, including USB boot, and several copies of the disc, however I always receive a "Unable to access boot device" error.

So far I've replaced RAM (Currently using 16GB of Crucial workstation RAM), both processors (tried with a single processor as well), multiple boards (fully up-to-date firmware), every SATA configuration, and several different methods of booting to the IDA.

I'm at complete loss here.

0 Kudos

Link Copied

1 Reply
Edward_Z_Intel
Employee
‎09-03-2013 02:47 AM
395 Views

If you're using a SATA optical drive, set it in AHCI mode. During boot, press F2 and go to "Boot Manager" to select boot device.

You may also try to burn another IDA CD using from the image: https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21848 https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21848

0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.