Update Firmware Intel® Ethernet X722 to version 4.11

[MarcinCh]

Hi! I have Intel® Server Board S2600WFT with Intel® Ethernet Connection X722 network adapter (LOM) with vsphere 7.0.  Following this page https://www.intel.com/content/www/us/en/support/articles/000005893/network-and-i-o/ethernet-products... where I can download firmware (NVM Image) 4.11 ?

On this page https://www.intel.com/content/www/us/en/support/articles/000034617/ethernet-products/700-series-network-adapters-up-to-40gbe.html i click link for  my board (S2600WFT)

but on linked page ( https://www.intel.com/content/www/us/en/download/19223/non-volatile-memory-nvm-update-utility-for-intel-ethernet-converged-network-adapter-x722-series-for-intel-server-board-s2600wf-wft-wfq-wf0-family.html ) only versions 4.00 and 4.10 are available (and 4.10 is described as latest) .

Where can I get 4.11 firmware version ?

Regards

Marcin

[Paul_R_Intel]

Hello MarcinCh,

Thank you for joining the community 

Please allow me to investigate why the Non-Volatile Memory (NVM) Update Utility version 4.11 is not listed in the available downloads and I will get back to you as soon as possible.

Regards 

Paul R. 

Intel Customer Support Technician 

For firmware updates and troubleshooting tips, visit: 

https://intel.com/support/serverbios 

[Paul_R_Intel]

Hello MarcinCh,

Thank you very much for your waiting time, and patience, after digging into your inquiry, I found that there is no version available NVM for that server board greater than 4.10. As far as the article referenced, we are working to update and clarify the information listed.

Please let us know if there is anything else that we can do for you.

Regards 

Paul R. 

Intel Customer Support Technician 

For firmware updates and troubleshooting tips, visit: 

https://intel.com/support/serverbios 

[MarcinCh]

Thank you Paul for answer, but according to this - is Intel® Server Board S2600WFT compatible with vmware vsphere 7.0 or not ?

[Paul_R_Intel]

Hello MarcinCh,

I hope you had a fantastic weekend, I did research on the VMware vSphere 7.0 and they state that they are based on VMware ESXi 7.0 and VMware vCenter Server 7.0 which indicates that it may be compatible with the board, you can always try the operating system but  we cannot guarantee functionality outside of the operating systems that we have already validated in the following article:

• https://www.intel.com/content/www/us/en/support/articles/000024288/server-products/server-boards.html

Please let us know if there is anything else that we can do for you.

Regards 

Paul R. 

Intel Customer Support Technician 

For firmware updates and troubleshooting tips, visit: 

https://intel.com/support/serverbios 

[Paul_R_Intel]

Hello MarcinCh,

We would like to follow up on your inquiry. We would like to know if you need further assistance. In case you do, we would highly appreciate if you would let us know.    

Regards 

Paul R. 

Intel Customer Support Technician 

For firmware updates and troubleshooting tips, visit: 

https://intel.com/support/serverbios 

[MarcinCh]

Hi Paul

Thank you , this is enough for me , don't have other questions.

Regards

[Paul_R_Intel]

Hello MarcinCh,

Thank you for your reply, we will mark the thread as close now. Thank you for choosing Intel.  

Regards 

Paul R. 

Intel Customer Support Technician 

For firmware updates and troubleshooting tips, visit: 

https://intel.com/support/serverbios 

[DmitryK]

Hi!
I have too Intel® Server Board S2600WFT with Intel® Ethernet Connection X722 network adapter (LOM) with vSAN 7.0 U2.

I also have a strong desire to try version 4.11, as I have some suspicions about the work of network interfaces.