Replacement Hardware - Small Pitch Cable Extension for F200 Internals

[Keith_B_1]

I am integrating the guts of the RealSense F200 into a custom built computer/capture rig I am building and I need an extension of the cable that goes from the camera module to the on-board processing in the F200. I am looking to get in contact with one of the hardware engineers in order to find out where I might be able to acquire a longer version of this relatively unique cable. I have attached a picture of it next to a measuring tape in mm. It has 10 pins and looks like it is around 0.5mm in pitch. I imagine longer versions of this cable are needed when manufacturers include the F200 into the tops of computer screens. 

Thanks!

[Xusheng_L_Intel]

You can contact with Amphenol to get such 10 pins cable. Thanks!

SALES CONTACT
Bruce Motavaf
AGIS - Sales Engineer
Amphenol
bruce.motavaf@amphenol-gis.com
408.799.6060

VENDOR     PART NUMBER    LENGTH    REVISION    
Amphenol    H26311-001          100mm    AX1    
Amphenol    H26312-001         150mm    AX1    
Amphenol    H26313-001         300mm    AX1    
Amphenol    H26314-001         500mm    AX1    

[effixen_e_]

hello Keith,

i have the same problem than you with the little internal pitch cable !

Do you find a plug to connect it ? I search a convertor: "internal pitch <----> usb 3.0 plug " !

Someone knows it ?

thx for the help

Francois

[effixen_e_]

I found this picture on the web (but without explanation)

it looks like that :

any ideas ?

Francois

[effixen_e_]

up !

if someone could help me ! please !

Fr

[Alan_M_]

Hey Everyone

I'm trying to achieve the exact same thing as Keith B. Did anybody have any luck identifying the hardware to connect to external USB?

Thanks

Moley

[effixen_e_]

Hi Moley,

I feel less alone ! Tell me if you find a begining of solution ! Thx

Francois