- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello ,
on vxworks platform , I need to make driver designed for Intel 82543 Ethernet controller work for Intel i210.
I tried booting the BSP image , it showed below mentioned errors.
1. EEPROM checksum Error
2. No PHY detected in MII bus scanning. ( No PHY available in MII )
Can anyone suggest me further to remedy.
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Jackey_Balwani,
Thank you for contacting the Intel Embedded Community.
The information that may help you is stated on the answers to the questions 2.9, 2.13, 2.16, 2.22, 2.29, and 2.30; on pages 8, 9, 10, and 12 of thehttp://www.intel.com/content/dam/www/public/us/en/documents/faqs/ethernet-controller-i210-i211-faq.pdf Intel(R) Ethernet Controller I210/I211 Frequently Asked Questions (FAQs).
Please let us know if this information is useful to you.
Best Regards,
Carlos_A.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Carlos ,
Thanks for your reply , I went through the file you mentioned ,which helped me understood the things to some extent , i found some relevant documents on the site but that requires privillege access .Can you please help me gain the access.
Regards
Jakey
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Jackey_Balwani,
Thanks for your reply.
Could you please tell us the numbers and /or the name of the documents that you refereed on your last communication?
Thanks for your cooperation.
Best Regards,
Carlos_A.
![](/skins/images/D2683F18326913BBA0436CB7114DD569/responsive_peak/images/icon_anonymous_message.png)
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page