SNMP for Intel ET Gigabit Dual Port server addapter issue with ANS

[RRina]

Hello.

I started a new thread, because the old thread ( ) don't have any answer from Intel's team since 2013 year.

I have installed the last version of PROWinx32.exe (21.1) with activation of the SNMP option on Windows 7 (32-bit).

I have configured an AFT teaming from two network interfaces. By using PROSetCL.exe, I have checked that this teaming works correctly.

My problem is when I make a SNMP dump of the intel-Ian-adapters MIB, I have the following results:

• baseDriverLoadedAnsNotLoaded(1) for the status when I am expecting baseDriverLoadedAnsLoaded(3)
• standAlone(0) for the type of the adapters involved in the teaming when I am expecting teamMember(1)
• no data under ansAttrTables MIB subtree.

Previously, we used data from ansAttrTable MIB subtree on Windows XP with PROWin32.exe (v16.3) without any problems.

Under Windows 7 with the same (v16.3) driver and latest (v21.1) driver no data under ansAttrTable MIB subtree.

Is there something specific to do to have ANS loaded at SNMP level ?

[idata]

Hi RinatGadelshin,

Thank you for the post. I will need to investigate on this.rgds,wb

[RRina]

Hello =)

I use the following tools:

- Windows 7 professional SP1 (32-bit)

- Driver PROWinx32.exe ( version 21.1 ).

- iReasoning MIB Browser, for checking snmp data.

Component SNMP Service is turned on.

Read-only community for SNMP Service is "public"

SNMP Service listen any host.

Is more information needed?

[idata]

Hi RinatGadelshin,

Thank you for the information. Further checking, currently you have a case open for investigation in 02191704. The case is being handled accordingly, you may continue your inquiry from the existing case there.Thanks,wb

[RRina]

Hello!

Please, tell me, where I can see "a case open for investigation in 02191704" for "continue my inquiry"?

Thanks,

Rinat

[idata]

Hi Rinat,

There was an email you sent to our support in Russia dated Dec 15 and currently the case is being handled.Thanks,wb

[RRina]

Hello!

I have been received mail from Russian support today.

Do you need any more info about this issue?

Thanks,

Rinat

[idata]

Hi Rinat,

Thank you for the update. You can continue to contact our Russian support for them to assist you. No information needed here.Thanks,wb

[RRina]

Russian support told me this network card and Windows 7 is no longer supported.

Translation from russian:

"Intel® 82576EB Gigabit Ethernet Controller and Intel® Advanced Network Services in stage SM2 "End Of Life",

Windows 7 - in stage SM1 "End Of Life".

SM1 means that we will correct serious bugs only,

SM2 means that the support is practically finished."

Oops!

OK.

Next question: has Intel any dual port gigabit ethernet controller with teaming and snmp support for Windows 7 (or Windows 10)?

Thanks,

Rinat

[idata]

Hi Rinat,

Thank you for the update. You can refer to below URL for a list of Intel server adapters or ethernet controllers for reference:1) https://ark.intel.com/products/family/46829/Intel-Gigabit-Server-Adapters2) https://ark.intel.com/products/family/2469/Intel-Gigabit-Ethernet-Network-Connectione.g. I350-T2V2 is a standalone dual port server adapter which can support Windows 7 and teaming. https://ark.intel.com/products/84804/Intel-Ethernet-Server-Adapter-I350-T2V2 https://downloadcenter.intel.com/product/84804/Intel-Ethernet-Server-Adapter-I350-T2V2I350-AM2 for ethernet controller https://ark.intel.com/products/52968/Intel-Ethernet-Controller-I350-AM2 Please refer to the data sheet for more information to see if the ethernet controller or adapter meets your requirement. Thanks,wb