- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi all!
I'm using a Stratix II Development board and Dsp Builder 6.0. I would like to generate some clock signals in my FPGA to drive exernal circuits on a self-made daugther card. How can I do it with Dsp Builder. Waiting for your answers please! Thanks in advance. DzonaserLink Copied
2 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There isn't really a function that generates clocks in DSP Builder. With that said, you can probably use a modulo 2 counter to produce a clock like signal and send it out via an output pin... Then you can possibly use that as a clock...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for your reply.
I've also noticed that the block "Pattern" with bits "10" inside could generate the same clock signal. ========
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page