Cyclone 10 GX FPGA Dev Kit - Pin Assignments

[Zarquin]

Dear Community,

I want to program the Cyclone 10 GX FPGA Dev Kit with a custom PCIe project and I am having difficulties with the pin assignment (for the qsf file). I was able to determine some of the pin numbers from the schematic (https://www.mouser.de/pdfdocs/c10gx-dev-kits-board-a1-release.pdf), but not all and I am having trouble determining the pin attributes.

E.G.:
What is the pin number of the 50MHz clock?
What is the the Pin-Type and voltage for the user LEDs and user push buttons?

What is the Pin-Type for the PCIe TX and RX-Pins?
Where can I find this information?

Many thanks

[FvM · Accepted solution]

Dev-Kit schematic and user manual, also configuration existing example projects, all in cyclone-10-gx-kit-collateral.zip

Intel® Cyclone® 10 GX Development Kit

[Zarquin]

Hello FvM,

Unfortunately I could not find this information in the  Dev-Kit schematic and user manual.

I saw the cyclone-10-gx-kit-collateral.zip link, but i couldn't download it: Access Denied.

[Zarquin]

Hello FvM,

O.K. I suceeded to download cyclone-10-gx-kit-collateral.zip from anther place than intel and in the
qsf-files of the examples were lots of qsf-files (see one of them in the attachment).

So, thank you very much.

Best Regards

[Wincent_Altera]

Hi

Seen like your problem had been solved by the community support.

Thanks FvM for helping on this.

If you feel your Intel Forum Support experience was less than a 9 or 10,

please allow me to correct it before closing or please let me know the cause so that I may improve your future support experience.

Regards,

Wincent_Intel