Hallo from Germany,
I have a new NUC8i7HNK.
I have installed one bank of memory
I have installed an ssd 970 evo plus 1TB
I tried a wireless logitech Keyboard/mouse set
and am old(?) philips 273Eqh with HDMI cable.
I connected an external DVD reader with the windows10 iso content.
The nuc starts, the light of the face appear.
Message "No Video Signal" or "cable problem" on screen.
(two different HDMI calbles)
No action on F2, F4 or F10, and after two minutes the nuc stopps.
Restartet after a short break.
I changed to wired Keyboard and mouse.
Display mentioned thats there is no Video Signal or cable problem (on both sockets?
What is my Problem?
Many thanks in Advance.....
Link Copied
no!
you should install the memory bank correctly!
than you can use your Philips display!
Hallo Alberto,
many thanks for your interest.
In the meantime I have looked for "my problem" in the postings for the last 8 months.
One advice was, to remount all things from the beginning. I took the memory and the ssd out of the nuc and followed the insstructions.
And the memory board was my problem. It wasn't deep enough in the slot. The "clipping noise" was a little bit more professionell.
And what shall I say. Now it works. The DVD with the win10 iso was detected and the rest ist simple work.
Now i can see these two green lights!!
I am happy with the nuc and have all SW installed and activated.
Many thanks again.
Jan-Dirk Kleffel
PS: For new users, don't worry, anyone else has made your error long time before you. You only has to look in the database of the intel-forum
For more complete information about compiler optimizations, see our Optimization Notice.