Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
16556 Discussions

Error while creating a project using Nios II Software Build Tools for Eclipse

Altera_Forum
Honored Contributor II
5,385 Views

I am running quartus2 and nios2eds in windows. 

 

i was unable to Create a New Nios II Application and BSP from Template. 

 

the error was  

 

unable to create project 

 

Reason: 

Failed to execute: ./create-this-app --no-make 

chmod: changing permissions of `.': Permission denied 

chmod: changing permissions of `./create-this-app': Permission denied 

 

some one help me :confused:
0 Kudos
11 Replies
Altera_Forum
Honored Contributor II
3,020 Views

 

--- Quote Start ---  

I am running quartus2 and nios2eds in windows. 

 

i was unable to Create a New Nios II Application and BSP from Template. 

 

the error was  

 

unable to create project 

 

Reason: 

Failed to execute: ./create-this-app --no-make 

chmod: changing permissions of `.': Permission denied 

chmod: changing permissions of `./create-this-app': Permission denied 

 

some one help me :confused: 

--- Quote End ---  

 

 

I have the same problem. I'm using Quartus II web edition 10.0sp1 and Nios II Eclipse suite 10.0sp1 

 

I have the same problem
0 Kudos
LigasN
Beginner
2,666 Views

I had this error with output like: 

SEVERE: .entry section mapping not created because reset memory region 
not located at base address 0xffffffffffffffff.

then I checked:
https://embdev.net/topic/248933

Had the same problem, sovled it by :

- in QSYS->System Contents , right click your Nios cpu -> Edit...
- in the tab "Core NiosII", check if "reset vector memory" points to a 
memory module and not e.g. jtag etc.
- same with "exception vector memory"
- after correction : QSYS->Generation->Generate

 And finally, I've set the proper Reset Vector Memory (on my RAM.s1 connected to NIOSII) and Exception Vector the same way. I had no "Core NiosII" tab in 18.1 version.

0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

I have the same problem . The appeared problem is : 

unable to create project 

 

Reason: 

Failed to execute: ./create-this-bsp -- cpu name cpu_0 --no-make 

 

Kindly advise. 

Your prompt reply is highly appreciated
0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

 

--- Quote Start ---  

I have the same problem . The appeared problem is : 

unable to create project 

 

Reason: 

Failed to execute: ./create-this-bsp -- cpu name cpu_0 --no-make 

 

Kindly advise. 

Your prompt reply is highly appreciated 

--- Quote End ---  

 

 

Use "Run As Administrator" command for Nios II Software Build Tools for Eclipse tool (i.e. right-click the Nios II Software Build Tools for Eclipse icon and select Run As Administrator). 

 

Jari
0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

Thank you. I tried it but it is still not working

0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

Great!Thank you...

0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

Thank you very much!

0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

 

--- Quote Start ---  

Thank you. I tried it but it is still not working 

--- Quote End ---  

 

 

Try sharing the project folders with everyone. I'm using Windows7 so I right-click on the top level project folder and select Sharing/Homegroup(Read/Write). Make sure the sharing caries down through the sub-folders.
sathvik
Beginner
1,311 Views
0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

I have the same problem .Try it .Thank you very much.

0 Kudos
Altera_Forum
Honored Contributor II
3,020 Views

I had the same issue when I tried to create "Hello world" project. I ran the eclipse as Administrator then it worked. Thanks a lot Jari.. 

 

-Vijay
0 Kudos
Reply