Intel® SoC FPGA Embedded Development Suite
Support for SoC FPGA Software Development, SoC FPGA HPS Architecture, HPS SoC Boot and Configuration, Operating Systems
573 Discussions

Using Intel Arria10 PAC card in 10G mode

DNguy4
Beginner
‎06-19-2019 02:40 AM
1,061 Views

Hi,

The Intel Arria10 PAC card has a QSFP+ port. Is it possible to use it in 10G mode, i.e. can i just use one channel of the QSFP+ port to get 10G connection? I assume that i will need to use a QSFP to SFP cable for this application.

If you are familiar with this, please give me as much detail as you can.

Thanks

0 Kudos

Link Copied

1 Reply
SengKok_L_Intel
Moderator
‎06-19-2019 05:22 AM
827 Views
Hi, Yes, you can just use one QSFP port for 10G connection. Below is the documentation link for A10 PAC including the 10G Ethernet user guide https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/acceleration-card-arria-10-gx/documentation.html Regards -SK
0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.