- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I have a Lenovo T400 x86 laptop with AMT version 4.1.3 that is fully configured and functional with SCCM and vPro. it is provisioned and all is well. However, when i restart the computer from within SCCM OOB, i am hit with a BIOS message
1802: Unauthorized network card is plugged in - Power off and remove the miniPCI network card.And am unable to restart the computer locally even with CTRL-ALT-DEL. i need to fully power off..]]
Has anybody experienced this at all?
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have not seen this problem. However, a google search turned this up. Not sure if it will help, but might be a place to start:
http://www.thinkwiki.org/wiki/Problem_with_unauthorized_MiniPCI_network_card http://www.thinkwiki.org/wiki/Problem_with_unauthorized_MiniPCI_network_card
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I found that as well but that doesnt really apply since we are not replacing any OEM hardware. Everything is the same as when shipped. When we restart the laptop using normal windows restart functions or via the power button, this error does not get thrown.Only when the laptop is rebooted using vPro commands....
There is something that is hooking this error with vPro...Its def vPro specific and I have updated the BIOS and AMT Firmware to the latest to no avail.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hmm. Is this one T400 of multiple? What is the current AMT firmware and BIOS version? When you send the reboot command, is the T400 connected to the wired or wireless interface (or both)? Does the same error happen if you perform the reboot via AMT's WebUI?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Laptop is wired, AMT Firmware is 4.2 and BIOS is latest, not sure of the version.
The problem is consitent accross all management tools from SCCM to Intel's native Commander
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi I also have the same problem, kinly let me know what you did??
![](/skins/images/B7BA37F9CE4B52FF7CAE1FB0388839C8/responsive_peak/images/icon_anonymous_message.png)
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page