BOM (Bill of Material) availability check. 1) EPM7128AEFI100-7N 2) 10M40DAF484I7G 3) 10M40DAF484I7G

[TChap7]

1) Is each P/N Valid and Orderable?

2) If each P/N is Not Valid and Orderable, what is the Valid and Orderable P/N,

Replacement P/N, or Mfr’s Preferred P/N?

3) Any Plans to Discontinue or Replace the Valid and Orderable P/N, Replacement P/N, or Mfr’s Preferred P/N Within 2 Years?

4) What is the Part’s Termination Finish/Plating?

i.e. 100% Sn, Sn/Pb 60/40, NiPdAu, Au, etc.

If the finish is Gold, what the Au thickness?

(Or Attach or Specify URL Link to Materials Declaration)

Thanks.

-Todd Chapman

todd.chapman@rtx.com

[TChap7]

​The 3rd Part Number should be:

3) EP3C5E144I7N

All three (3) part numbers are from ALTERA.

[NurAiman_M_Intel]

Hi Todd,

Thank you for contacting Intel community.

All of the 3 part number mention above are still active and orderable.

You can purchase the devices from our authorized distributors:

https://www.intel.com/content/www/us/en/programmable/buy.html

Kindly go to the link below for material declaration:

https://www.intel.com/content/www/us/en/programmable/support/quality-and-reliability/environmental/material-decl.html

Anyhow, the life cycle is depending on its order volume.

You can subscribe to our customer notification mailing list at below link so that you can be notified when an Altera(now Intel) device is going to be discontinued.

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd04252012_977.html

Thank you.

Regards,

Aiman