Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20750 Discussions

Issue with Downloading .sof file to Agilex Device Via Quartus

WOLVS2
Beginner
769 Views

I have successfully build  a .sof file and attempted to download it to Agilex device using Quartus. However, I have the following error message

Error [213002]:  programming option is illegal. 

after reviewing the  Intel Agilex document and I found out the Agilex device includes a Secure Device Manger. Could this be influencing the error?

Is any workaround solution available to successfully download the file?

Labels (1)
0 Kudos
10 Replies
sstrell
Honored Contributor III
726 Views

Which device?  What version and edition of Quartus (presuming Pro)?  Does your design include any IP that you haven't licensed?

0 Kudos
NurAiman_M_Intel
Employee
649 Views

Hi,

 

-Can you provide the screenshot of the error?

-What type of Agilex did was used? Please provide the OPN number.

-What is the Quartus version?

 

Regards,

Aiman

0 Kudos
WOLVS2
Beginner
631 Views

Hi Aiman,

Thank you for looking into this. Here are my responses:

-Can you provide the screenshot of the error?

Here is screenshot of the error.

WOLVS2_0-1713445733959.png

 

-What type of Agilex did was used? Please provide the OPN number.

The target device is agfb027r24c2e2vr2.

-What is the Quartus version?

The version is 23.04

0 Kudos
NurAiman_M_Intel
Employee
461 Views

Hi,


It might be that the Quartus Prime software cannot use this file because the file is corrupted or incomplete.

Can you try to regenerate the file and make sure the regenerated file is not corrupted or incomplete.


Regards,

Aiman


0 Kudos
NurAiman_M_Intel
Employee
333 Views

Hi,


Do you have any update for this case? Any further information needed?


Regards,

Aiman


0 Kudos
WOLVS2
Beginner
315 Views

Hi Aiman,

Thank you for looking into this.

I attempted to recompile the .sof file using the updated Quartus 24.1, but the errors have persisted.

Please advise on the next steps.

0 Kudos
NurAiman_M_Intel
Employee
285 Views

Hi,


You are using HPS right? Please provide us your smartVID setting. You can find it in Quartus.


Regards,

Aiman


0 Kudos
WOLVS2
Beginner
182 Views

Hi,

 

HPS is used in the deign. The constraint file can be found in the attachment. 

0 Kudos
NurAiman_M_Intel
Employee
123 Views
0 Kudos
NurAiman_M_Intel
Employee
45 Views

Hi,


Any further information needed for this case? Else, I will proceed to close this case for now.


Regards,

Aiman


0 Kudos
Reply