Hello,
I want to implement Flash, ROM and RAM memories on the DE1-SoC board using the MegaWizard Plug-In Manager tool or any other wizard-type tool. Could you recommend me any manual, book or workshop that will help me learn how to use this type of memory generation tools for the Quartus Prime Lite software?
Regards
链接已复制
You just add them as IP from the IP Catalog in Quartus. Parameterize them and instantiate them in your design. The Quartus User Guides are a good place to start: https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-software/user-guides.html
And you can find tons of training at the training web site: https://learning.intel.com/developer/pages/128/intelr-fpga-training
Hi
You could take a look ah the embedded user guide on the use of the IPs .
The IPs that you are interested are On Chip Memory IP, Generic Serial Flash IP.
https://www.intel.com/content/www/us/en/docs/programmable/683130/24-1/introduction.html
Regards
Jingyang, Teh
Thank you very much, your answers have been very helpful.
Continuing with the subject of memory, I want to learn how to use the SDRAM memory that the Altera DE1-SoC contains. I tried to access the following intel server ftp sites but an error message appears. How can I access this information?
Thanks
Regards
SDRAM (non-DDR) IP has been removed in recent Quartus versions, apparently respective tutorials too.
Need to refer to Quartus-20 or before. Tutorials are still around on the Internet, I think.
https://community.intel.com/t5/Programmable-Devices/Where-is-the-SDRAM-controller-IP-in-Quartus-21-Lite/m-p/1371523#M84283
Hi
In addition you could take a look at the SDRAM Controller IP in the embedded user guide below:
https://www.intel.com/content/www/us/en/docs/programmable/683130/24-1/sdram-controller-core.html
Regards
Jingyang, Teh
Hi
As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.
Regards
Jingyang, Teh
