Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Beginner
17 Views

What’s the eMMC max data rate the cyclone V supported with 8-bit data bus?

In Cyclone V TRM(cv_5v4, 2020.02.28), it shows that MMC V4.41 8-bit data bus is currently supported. DDR timing is supported for eMMC too.

001.png

002.png

According to the MMC 4.41 specification, with 52MHz clock speed,eMMC can get maximum data rate to 52MB/s in single data rate mode and 104MB/s in dual data rate mode.

But in In Cyclone V TRM, the table shows that the maximum data rate is 25MB/s.

003.png

That’s quite confusing.

So does current Cyclone V support eMMC V4.41 8-bit dual data rate mode?

What’s the max data rate the cyclone V supported with 8-bit data bus?

There’s additional information about this question.

In Cyclone V TRM cv_5v4 (2014.12.15), eMMC 8-bit data bus /DDR mode was not suppported at that time. But the max data rate was 25MB/s by then. I think the max data rate should be improved while cyclone V supports eMMC 8-bit data bus and DDR mode, is that right?

004.png

Thanks

Tags (1)
0 Kudos