Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4762 Discussions

R2308WTTY not starting

MGera1
Beginner
1,637 Views

Hello,

I have a problem with the new server platform R2308WTTY. After power on i dont get any video, all the fans run at maximum speed

Specs:

Server platform R2308WTTY

MB S2600WT

2 x XEON E5-2630 v4

8 x KVR24E17D8/16

Error

POST error code 3 beeps

green:

0=on

1=on

2=on

3=off

orange

4=off

5=off

6=off

7=off

Can you help me?

0 Kudos
1 Solution
idata
Employee
382 Views

Hello Mikhail,

 

 

The 3 beeps during the system post indicate that there is a memory error, you can find more information https://www.intel.com/content/www/us/en/support/articles/000006001/server-products.html here.

 

 

As the first troubleshooting step, we recommend using https://serverconfigurator.intel.com/exalt/RequestManager?ServletNumber=1&dynamicUser=Y&localinfo=0&RestrictionVal=SVG&APPLICATIONCODE=1 tested memory on your system.

 

 

You can also try to test your system with the minimal system configuration ( processor, server board, one memory stick) and check if the problem continues.

 

 

Also, try testing each memory slot at the time.

 

 

Best regards,

 

Sergio S.

View solution in original post

0 Kudos
5 Replies
idata
Employee
383 Views

Hello Mikhail,

 

 

The 3 beeps during the system post indicate that there is a memory error, you can find more information https://www.intel.com/content/www/us/en/support/articles/000006001/server-products.html here.

 

 

As the first troubleshooting step, we recommend using https://serverconfigurator.intel.com/exalt/RequestManager?ServletNumber=1&dynamicUser=Y&localinfo=0&RestrictionVal=SVG&APPLICATIONCODE=1 tested memory on your system.

 

 

You can also try to test your system with the minimal system configuration ( processor, server board, one memory stick) and check if the problem continues.

 

 

Also, try testing each memory slot at the time.

 

 

Best regards,

 

Sergio S.
0 Kudos
MGera1
Beginner
382 Views

Hello Sergio, thanks for answer.

I think that the problem is in an unsupported memory type. We try to use UDIMM memory, but in MB specs and E5 Xeon 2630 v4 only RDIMM or LRDIMM.

Can you confirm that?

0 Kudos
idata
Employee
382 Views

Hello Mikhail,

 

 

Upon checking the list of tested memory for your device, most of the memory supported is RDIMM, you can confirm this information here:

 

 

https://serverconfigurator.intel.com/exalt/RequestManager?ServletNumber=1&dynamicUser=Y&localinfo=0&RestrictionVal=SVG&APPLICATIONCODE=1

 

 

 

 

Best regards,

 

 

Sergio S.
0 Kudos
idata
Employee
382 Views

Hello Mikhail,

 

We are following up your question and we would like to know if you need further assistance.

 

 

Best regards,

 

Sergio S.
0 Kudos
idata
Employee
382 Views

Hello,

 

I case you need further assistance please contact us back.

 

 

Best regards,

 

 

Sergio S.
0 Kudos
Reply