DS-5 Version 2020.1 - Arria 10 EVB baremetal debug - configuration database empty

[TSege1]

Hi,

i Am trying to debug and test bare-metal application on Arria 10 EVB according to the instructions in  https://rocketboards.org/foswiki/Documentation/SoCEDS   

 in paragraph Arria 10 Bare Metal Example Using SoC EDS Pro Edition -> Exercise Sample Application,  section 12:

in debug configuration window i need to see all the Platforms like that:

But, in my debug configuration window i got  nothing:

Anny help will be appreciated,

Thanks,

Tamir

[TSege1]

HI All,

Still waiting for help.

Thanks,

Tamir

[AnilErinch_A_Intel]

Hi ,

It looks like that you are using an old DS-5 configuration with new ARM DS.

Please create a new DS-5 configuration instead of using an existing one and let us know the results.

Thanks and Regards

Anil

[TSege1]

Hi,

Can you guide me how to do that?

I searched for solution and didn't find.

 i made all the steps according to https://rocketboards.org/foswiki/Documentation/SoCEDS#Exercise_Sample_Application

thanks,

Tamir

[AnilErinch_A_Intel]

Hi ,

Please check the steps mentioned in the

https://rocketboards.org/foswiki/Documentation/SoCEDS#Run_U_45Boot_SPL_from_Debugger

and let us know the results.

Thanks and Regards

Anil

[TSege1]

Hi,

It's the same link to rocketboards site that i was send in my previous message.

I tried again to do the same thing, just to show you that the bug is still exist, this is what i got(again):

The database is still empty.

Thanks,

Tamir

[AnilErinch_A_Intel]

Hi ,

The target connection information comes from the configuration database which you are using.

Please explore your system and check whether you are able to see the data base files.

use the below link link as a reference on how to add a data base.

https://developer.arm.com/documentation/dui0446/z/platform-configuration/adding-a-configuration-database-to-ds-5

Thanks and Regards

Anil

[EShar1]

Hello Anil,

Thank you for your update.

I am the distributor embedded FAE working with Tamir.

I followed up with him the directions of ARM, still he is  failing to see any platform in the "connection" tab

of the "debug configuration" GUI.

This is what was done so far:

- We located the configdb directory, it looks complete.

- We verified the the preferences of the DS debugger are pointing to this directory.

- We also repeated the procedure to ARM DS 2021.0

Can you advise how to proceed?

Best regards,

Elhanan

[AnilErinch_A_Intel]

Hi All,

I am checking with the team here whether some one else has faced an issue similar to this.

The Rocket boards examples are well tested as you can see from the screen shots and multiple people use DS5 for debugging Intel SoCs.

Since you are seeing the same issue with two different versions of ARM DS even after following the configuration data base setup instructions , can you also open a case with ARM support

https://www.arm.com/support/contact-support

Thanks and Regards

Anil

[TSege1]

Hi Anil,

I already opened an issue at Arm.

Anil, can you please try the next steps to check if you also see this issue:

1.host PC running Linux Ubuntu 16.04.

2. Install DS Version 2020.1

3. Open Linux Terminal and type:

     a. /opt/arm/developmentstudio-2020.1/bin/suite_exec -t "Arm Compiler 5" bash 

     b.  armds_ide -data ~/ds.workspace& 

4. Import or create example project

5. Open Debug configuration  and check for devices list

Thanks,

Tamir

[AnilErinch_A_Intel]

Hi Team,

Please let us know whether you were able to resolve the issue after the feed back from ARM Support.

Thanks and Regards

Anil