Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21145 Discussions

MAX10 UART RSU EXAMPLE NOT WORKING

SAB4887
New Contributor I
3,094 Views

Hello ,

 

I have MAX10 development kit. I am trying to play with MAX10 RSU with  UART NIOS example files according to AN741 document.

I am able to program all files correctly but when i connect UART to terminal i don't see any  compunction there.

 

Any idea what i am missing ???

 

Thanks

25 Replies
SAB4887
New Contributor I
2,740 Views

SAB4887_0-1658339322588.png

SAB4887_1-1658339346562.pngSAB4887_2-1658339365111.png

 

0 Kudos
Ash_R_Intel
Employee
2,724 Views
0 Kudos
SAB4887
New Contributor I
2,718 Views

Hello,

 

Yes. I am following AN741. 

And I am directly programming MAX10 with files provided by Intel. 

Do i need to setup anything specifically if i use those output files ?

0 Kudos
Ash_R_Intel
Employee
2,709 Views

Hi,

Please check your connection to the board UART port. Are you able to use the Remote Terminal.exe?


Regards


0 Kudos
SAB4887
New Contributor I
2,698 Views

Hello,

I checked UART connection it working  fine.

Yes, i am able to use Remote Terminal.exe but i  am not seeing any data on it?

I tried on two development board both behaves same..

 

 

0 Kudos
Ash_R_Intel
Employee
2,679 Views

Hi,

Can you please tell the steps that you followed in detail?


Regards


0 Kudos
Ash_R_Intel
Employee
2,659 Views

Hi,

Any comment? Waiting for your reply.


Regards


0 Kudos
SAB4887
New Contributor I
2,652 Views

Following steps i am following to test "UART Remote upgrade"

 

 

 

Step 1 :  Programmed board with  "pfl.sof" file

SAB4887_0-1659971946596.png

 

 

Step2 :  Programmed QSPI with ".Hex" file

 

SAB4887_1-1659972132698.png

 

 

Step 3 :  Programmed FPGA with "factory_application1.pof"

SAB4887_2-1659972320788.png

 

Step 4 :  the CONFIG_SEL pin on the board is set to 0

 

SAB4887_3-1659972599411.png

 

 

Step 5 : UART communication : FPAGA connected through J11 UART connector

 

SAB4887_4-1659972641002.png

 

Step 6 : Open "Remote terminal.exe" file & configured UART communication.

SAB4887_5-1659973532897.png

 

Step 7: Press the nCONFIG button on the development kit or key-in 1 in the Send text box,then hit
Enter.

 

But after step7 I don't see any data on Terminal window.. ????

 

SAB4887_6-1659973760338.png

 

 

 

Am I missing anything ????

 

 

 

 

Thanks

 

 

0 Kudos
Ash_R_Intel
Employee
2,643 Views

Hi,

Please check if the USB port is getting identified on your machine through Device Manager, when you plug in the connector to on-board UART and connect to your PC. If not, please install the driver.


Regards


0 Kudos
SAB4887
New Contributor I
2,638 Views

 Yes, it is being identified as COM Port 9 when i connect to USB to J11 connector.

SAB4887_0-1660227930837.png

 

 

0 Kudos
hareesh
Employee
2,612 Views

Hi Subodh Bansode,

Are you still facing this issue?



0 Kudos
SAB4887
New Contributor I
2,605 Views

Yes.

0 Kudos
hareesh
Employee
2,547 Views

Hi,

i am giving video link of Remote System Upgrade in Intel® MAX® 10 Devices. pls follow step by step. if you are facing issue after that let me know.

 

https://www.youtube.com/watch?v=KPWOpYQD_JM

 

Thank you,

 

0 Kudos
braind1
Novice
822 Views

This is a private video. Can you make it public?

0 Kudos
SAB4887
New Contributor I
2,531 Views

Hello,

 

I did follow that video but still i am seeing same result. 

0 Kudos
SAB4887
New Contributor I
2,530 Views

Did i miss any, above explain steps i am following ?

0 Kudos
hareesh
Employee
2,498 Views

Hi,

I am sharing example project. once again try it same steps with this project files.


https://www.intel.com/content/www/us/en/design-example/714833/max-10-max10-remote-system-upgrade-rsu-over-uart-for-nios-ii-processor.html



Thanks,


0 Kudos
hareesh
Employee
2,462 Views

Hi,

We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread.

Thank you.

 

Best Regards,

0 Kudos
SAB4887
New Contributor I
2,403 Views

Sorry for late reply.

 

I did try that example project from above link. But still i am seeing same issue.

0 Kudos
EP1
Novice
1,966 Views

Hi,

 

I am having the same problem.

Any new information about how to solve it?

 

Thanks

Reply